macboy
Posts: 3146
Registered: 10-15-2007
Location: Edmonton, Alberta
Member Is Offline
Mood: They're ALL good ideas. Right up until they become BAD ideas.
|
|
MBS Pro90 Carbon - $250CDN plus shipping
Time to let this one go. I never kited much with it - always preferred the coyotes or the buggy to the ATB. It was nearly new when I got it and it's
still nearly new. I only kept it around this long because I'd been seriously contemplating turning it into an eSkate. I've since fallen head over
heels for the EUC world and that means this one will never get to bring the kind of joy it's meant to bring.
I can tear it down for shipping and it's super light. If you're interested let me know your address and I'll do the shipping estimator thing.
Doing a bit of soul searching on my Kite Kloset and weeding things out over the next few weeks so have a look at my sig and let me know if anything
there peaks your interest. I'm not liquidating but there are several kites down there that I'll likely be trying to rehome.
KC07 - Certified Chronic
Rev Shockwave | Brooza II 3 | BusterII's 3/4/5 | Hornet 1.5
Reactor II 5.5/6.9 | AccessXC 10 | Frenzy 12 | PsychoIII 13 | Speed2 12 | Speed3 15 | SA2.5 19
Bomba 15 | Phantom 15/18 | Venom 13 | Slingshot T3 9/11/14m
Skis, Ski Skates, Nobile RM Pro, MBS Pro 90, Kailolo 5' 11" Custom Phish, Kailolo 5'9" Custom Phish, Plyboard, Proof 151,
FlydoorM, F-One 198, Coyotes, Comp XR+, and the BEST WIFE IN THE WORLD!
I have not failed. I've just found 10,000 ways that won't work.
~ Thomas Edison
|
|
|
dylanj423
Posts: 1482
Registered: 1-24-2008
Member Is Offline
|
|
theres a chance i could be interested in the phantoms
WHAT I FLY:
Flysurfer Soul v2 12m, Soul 15m, Soul v2 21m
Flexi Rage 1.8m, Jojo RM 3m, Flexi Blurr 3.5, Flexi Blade 4.0m, Flexi Blade 4.9m, Flexi Blurr 5, Jojo RM 6m
WHAT I RIDE:
Kite Skates, Libre Full Race, GI Conflict 106, OR Mako 140, Spleene Door 159
What I Am In The Market For: Peter Lynn Vapors, Weatherproof Kite Buggy Bag for Libre, PL or Flexi Small Buggy to Tow With, Flexi Pro Link Handles,
Flexi Lines, Flexi Kite Killers
|
|
|
macboy
Posts: 3146
Registered: 10-15-2007
Location: Edmonton, Alberta
Member Is Offline
Mood: They're ALL good ideas. Right up until they become BAD ideas.
|
|
Ha! That was cruel of me to do with the Phannys in my sig hey? Sadly those will have to stay home with me. Most of the high wind stuff will go as we
don't get wind like that around here. I've also got a brand new 9m Fury. Still in plastic. Need to remember what I paid for it (not that I'm opposed
to selling at a loss.....it's my bad for sitting on it and not enjoying it).
KC07 - Certified Chronic
Rev Shockwave | Brooza II 3 | BusterII's 3/4/5 | Hornet 1.5
Reactor II 5.5/6.9 | AccessXC 10 | Frenzy 12 | PsychoIII 13 | Speed2 12 | Speed3 15 | SA2.5 19
Bomba 15 | Phantom 15/18 | Venom 13 | Slingshot T3 9/11/14m
Skis, Ski Skates, Nobile RM Pro, MBS Pro 90, Kailolo 5' 11" Custom Phish, Kailolo 5'9" Custom Phish, Plyboard, Proof 151,
FlydoorM, F-One 198, Coyotes, Comp XR+, and the BEST WIFE IN THE WORLD!
I have not failed. I've just found 10,000 ways that won't work.
~ Thomas Edison
|
|
|
flyhighWNY
Posts: 327
Registered: 10-24-2012
Location: Buffalo/Niagara Falls, NY
Member Is Offline
|
|
I have a friend looking she borrowed a board and for straps were too far apart. Any idea of distance between? Can they be moved?
|
|
|
macboy
Posts: 3146
Registered: 10-15-2007
Location: Edmonton, Alberta
Member Is Offline
Mood: They're ALL good ideas. Right up until they become BAD ideas.
|
|
I'm just out on a camping trip but back Friday. I'll check and let you know.
KC07 - Certified Chronic
Rev Shockwave | Brooza II 3 | BusterII's 3/4/5 | Hornet 1.5
Reactor II 5.5/6.9 | AccessXC 10 | Frenzy 12 | PsychoIII 13 | Speed2 12 | Speed3 15 | SA2.5 19
Bomba 15 | Phantom 15/18 | Venom 13 | Slingshot T3 9/11/14m
Skis, Ski Skates, Nobile RM Pro, MBS Pro 90, Kailolo 5' 11" Custom Phish, Kailolo 5'9" Custom Phish, Plyboard, Proof 151,
FlydoorM, F-One 198, Coyotes, Comp XR+, and the BEST WIFE IN THE WORLD!
I have not failed. I've just found 10,000 ways that won't work.
~ Thomas Edison
|
|
|
flyhighWNY
Posts: 327
Registered: 10-24-2012
Location: Buffalo/Niagara Falls, NY
Member Is Offline
|
|
Ok thx. She'll be stoked if it'll work. She's 5'3"
|
|
|
macboy
Posts: 3146
Registered: 10-15-2007
Location: Edmonton, Alberta
Member Is Offline
Mood: They're ALL good ideas. Right up until they become BAD ideas.
|
|
I have a few photos. I can post them here if you like (later) or email them to you (now). If you'd like me to email them u2u me your address and I'll
send them your way. They don't have any holes to move them and if I go inside to inside of the binding it measures 13 1/2". Center of foot area to
center is 17 1/2". And it looks like the bindings squeeze down real good. I can set them to the smallest they go and put a tennis ball in them for
reference if you like.
KC07 - Certified Chronic
Rev Shockwave | Brooza II 3 | BusterII's 3/4/5 | Hornet 1.5
Reactor II 5.5/6.9 | AccessXC 10 | Frenzy 12 | PsychoIII 13 | Speed2 12 | Speed3 15 | SA2.5 19
Bomba 15 | Phantom 15/18 | Venom 13 | Slingshot T3 9/11/14m
Skis, Ski Skates, Nobile RM Pro, MBS Pro 90, Kailolo 5' 11" Custom Phish, Kailolo 5'9" Custom Phish, Plyboard, Proof 151,
FlydoorM, F-One 198, Coyotes, Comp XR+, and the BEST WIFE IN THE WORLD!
I have not failed. I've just found 10,000 ways that won't work.
~ Thomas Edison
|
|
|
B-Roc
Posts: 3159
Registered: 3-9-2006
Location: Massachusetts
Member Is Offline
|
|
Quote: Originally posted by macboy  | | I have a few photos. I can post them here if you like (later) or email them to you (now). If you'd like me to email them u2u me your address and I'll
send them your way. They don't have any holes to move them and if I go inside to inside of the binding it measures 13 1/2". Center of foot area to
center is 17 1/2". And it looks like the bindings squeeze down real good. I can set them to the smallest they go and put a tennis ball in them for
reference if you like. |
Unless I am mistaken, the binding mount brackets can be adjusted in or out based on the holes in them. Your healside mounts seem like they can be
moved in one hole - unless they need to be where they are for the angle to work. If I've misunderstood the hole question... ignore.
Depower Quiver: 14m Gin Eskimo, 10m Gin Eskimo III, 6m Gin Yeti, 4.5m Gin Yeti (custom bridle and mixer)
Fixed Bridle Quiver: MAC Bego 400, JOJO ET Instinct 2.5 & 5.5, Lil Devil 1.5, Sting 1.2
Rides: Ground Industries
|
|
|
macboy
Posts: 3146
Registered: 10-15-2007
Location: Edmonton, Alberta
Member Is Offline
Mood: They're ALL good ideas. Right up until they become BAD ideas.
|
|
Sorry for the delay getting these here. I see a little adjustment via oblong mounting hole but no other inserts to actually move them. There are two
inserts for a grab handle in the middle.
KC07 - Certified Chronic
Rev Shockwave | Brooza II 3 | BusterII's 3/4/5 | Hornet 1.5
Reactor II 5.5/6.9 | AccessXC 10 | Frenzy 12 | PsychoIII 13 | Speed2 12 | Speed3 15 | SA2.5 19
Bomba 15 | Phantom 15/18 | Venom 13 | Slingshot T3 9/11/14m
Skis, Ski Skates, Nobile RM Pro, MBS Pro 90, Kailolo 5' 11" Custom Phish, Kailolo 5'9" Custom Phish, Plyboard, Proof 151,
FlydoorM, F-One 198, Coyotes, Comp XR+, and the BEST WIFE IN THE WORLD!
I have not failed. I've just found 10,000 ways that won't work.
~ Thomas Edison
|
|
|
|
![[*]](images/perspective/default_icon.gif){kind=icon}
