j0fer
Junior Member
Posts: 65
Registered: 17-4-2011
Member Is Offline
|
|
- SOLD - Peter Lynn Comp XR in VG condition $300
Peter Lynn Comp XR in very good condition. Pictures should do it justice. In one pic there is some fuzz where I bet a tag was removed, it's not a rip.
If I wasn't lazy I'd clean that up and take a new picture.
Shipping should be around $40 I think.
Ok I haven't been on here in a while...working on how to get these images to render. |
|
|
jeepersjoey
Member
Posts: 454
Registered: 1-1-2012
Location: Denvah Dahlin'
Member Is Offline
Mood: Vapor Trails...
|
|
Looks good!
Good luck on your sale.
Paul
Peter Lynn - Resurrected Vapors (thanks to Tenacious Tape): 3.2, 3.8, 4.5, 5.4m. Size 2.3m (dead) - all internal bellows shredded
Pansh - Cerberus - 3, 4, 5, 6, 7.5, 9m. (red)
Peter Lynn - Viper - 2.6m
Flexifoil - Rage - Rasta 1.8, 2.5 (dead), 3.5 (dead), 4.7 (v2). New backup of 2.5m and 3.5m.
Ozone - Method 6.5m (w/ Ozone Turbo Bar)
Libre - Bora - Yellow 3.0 & 4.5 (both on their last breath of life)
Peter Lynn - C-Quad - 6.3
HQ - NPW9: 3.4 & 5.3. NPW5: 1.0
Buggies (Kite and Land)
#1 Buggy: Libre Full-Race
#2 Buggy: Peter Lynn Suspension buggy
#3 Sailer: Homemade Land Sailer
#4 Buggy: Windspeed Pro Ivanpah Buggy named Bruce (because he weighs 130 lbs!!)
Paul's Photo Album
Paul's Videos |
|
|
j0fer
Junior Member
Posts: 65
Registered: 17-4-2011
Member Is Offline
|
|
Thanks!
|
|
|
cheezycheese
Posting Freak
Posts: 3760
Registered: 18-8-2009
Location: Poughkeepsie, NY
Member Is Offline
Mood: Ready for action !!!
|
|
Fine looking buggy. Rock bottom price, great deal. GLWS 
US888
PL- Aero v1 11m / Phantom 6/9/12/15/18
Ozone Chrono v2 9m
Liquid Force Elite 6.5m
Flysurfer - Peak 3 4m
PKD - Century 2.5m, Soulfly 3.5m
Ted's Profoil-1m/3.5m
Custom NABX Rev
GT Rapide V/VTT-XR+ Special
|
|
|
BEC
Senior Member
Posts: 910
Registered: 4-9-2011
Location: Avon, N.Y.
Member Is Offline
Mood: I have the WildWood Blues....
|
|
I have a downtube....wide fork and bigfoot lights to go with this if you want.....I'm thinking about 300.00 for all of it. The rims are the PL ones
with the blow out valve....I purchased this all from Angus at East Coast Kite Sports. I can bring it with me to WildWood in the spring or box and ship
for you. I can get great deals shipping as it will be for a commercial location and packing materials are free so...just the charge.
1.8 Flexifoil Rage
2.5 Flexifoil Rage (new version)
3.5 Flexifoil Rage
4.7 Flexifoil Rage
2.0 Flexifoil Blade II
4.0 Flexifoil Blade II
6.6 Flexifoil Blade III
8.5 Flexifoil Blade III
5.0 Flexifoil Blurr
7.0 Flexifoil Bullet
NAPKA member US822
SS. Flexifoil buggy w/ both wide and std. axle Custom VTT seat
Running both Bigfoot -N- barrows
|
|
|
kitesurfer
Member
Posts: 201
Registered: 19-12-2007
Location: jacksonville fla
Member Is Offline
|
|
shipping to 32225....I have paypal
kitesurfer2@att.net
Charger 12/15, Flysurfer
Speed3, 21, GLIDE, MAKO KING, UNDERGROUND FLX134,
|
|
|
pbc
Senior Member
Posts: 830
Registered: 9-5-2009
Location: Gainesville, FL
Member Is Offline
Mood: Updated, edited, and published
|
|
Quote: Originally posted by BEC  | | I have a downtube....wide fork and bigfoot lights to go with this if you want.....I'm thinking about 300.00 for all of it. The rims are the PL ones
with the blow out valve....I purchased this all from Angus at East Coast Kite Sports. I can bring it with me to WildWood in the spring or box and ship
for you. I can get great deals shipping as it will be for a commercial location and packing materials are free so...just the charge.
|
I have XR+ with a cracked fork that needs to be replaced. Do you know if I can put the BF fork on the standard downtube? What would that do to the
geometry of the buggy?
Philip
I fly: Charger II 6.5m * Charger II 8m * Charger II 10m * Scorpion 10 (for sale) * Phantom II 12m * F-Arc 1200 * Venom 13m
I ride: Peter Lynn XR+ on Midis * Flexifoil Midi/Barrow * Peter Lynn Comp on Barrows * Peter Lynn XR+ (needs a fork)
I build: Custom bars for buggy pilots
I write about kite stuff: at http://philipbchase.com
Philip Chase
|
|
|
acampbell
Posting Freak
Posts: 3879
Registered: 26-7-2006
Location: Las Cruces, NM. Sometimes
Member Is Offline
Mood: Digging Deserts and Mts.
|
|
| Quote: Originally posted by pbc | | Quote: Originally posted by BEC | | I have a downtube....wide fork and bigfoot lights to go with this if you want.....I'm thinking about 300.00 for all of it. The rims are the PL ones
with the blow out valve....I purchased this all from Angus at East Coast Kite Sports. I can bring it with me to WildWood in the spring or box and ship
for you. I can get great deals shipping as it will be for a commercial location and packing materials are free so...just the charge.
|
I have XR+ with a cracked fork that needs to be replaced. Do you know if I can put the BF fork on the standard downtube? What would that do to the
geometry of the buggy?
Philip |
All XR+ parts are interchangeable between the BigFoot and regular XR+. For example you can piece by piece morph an XR+ to a Bigfoot.(and BTW, you can
put a Bigfoot downtube and fork assy. on a Flexifoil frame). A BF fork on an XR+ will just raise the front a few inches but should not significantly
affect the rake and trail.
|
|
|
kitesurfer
Member
Posts: 201
Registered: 19-12-2007
Location: jacksonville fla
Member Is Offline
|
|
guess he don't want to sell to me.
Charger 12/15, Flysurfer
Speed3, 21, GLIDE, MAKO KING, UNDERGROUND FLX134,
|
|
|
Highflyingkitenut
Junior Member
Posts: 17
Registered: 2-3-2018
Member Is Offline
|
|
still available?
|
|
|
pbc
Senior Member
Posts: 830
Registered: 9-5-2009
Location: Gainesville, FL
Member Is Offline
Mood: Updated, edited, and published
|
|
| Quote: Originally posted by BEC | | I have a downtube....wide fork and bigfoot lights to go with this if you want.....I'm thinking about 300.00 for all of it. ... |
How much for the downtube and fork shipped to 32605? I don't need the tires.
Philip
I fly: Charger II 6.5m * Charger II 8m * Charger II 10m * Scorpion 10 (for sale) * Phantom II 12m * F-Arc 1200 * Venom 13m
I ride: Peter Lynn XR+ on Midis * Flexifoil Midi/Barrow * Peter Lynn Comp on Barrows * Peter Lynn XR+ (needs a fork)
I build: Custom bars for buggy pilots
I write about kite stuff: at http://philipbchase.com
Philip Chase
|
|
|
pbc
Senior Member
Posts: 830
Registered: 9-5-2009
Location: Gainesville, FL
Member Is Offline
Mood: Updated, edited, and published
|
|
| Quote: Originally posted by acampbell | | Quote: Originally posted by pbc |
I have XR+ with a cracked fork that needs to be replaced. Do you know if I can put the BF fork on the standard downtube? What would that do to the
geometry of the buggy?
Philip |
All XR+ parts are interchangeable between the BigFoot and regular XR+. For example you can piece by piece morph an XR+ to a Bigfoot.(and BTW, you can
put a Bigfoot downtube and fork assy. on a Flexifoil frame). A BF fork on an XR+ will just raise the front a few inches but should not significantly
affect the rake and trail. |
Angus,
This is intriguing. So does the reverse work? Can I install a Flexifoil downtube and front fork onto an XR+? And if I did, is the Flexifoil fork wide
wheel enough to take a wide wheel? I.e., I have 16 x 6.5-8.0 wheels that are about 5.75" wide mounted.
I really want to keep the XR+ going.
Philip
I fly: Charger II 6.5m * Charger II 8m * Charger II 10m * Scorpion 10 (for sale) * Phantom II 12m * F-Arc 1200 * Venom 13m
I ride: Peter Lynn XR+ on Midis * Flexifoil Midi/Barrow * Peter Lynn Comp on Barrows * Peter Lynn XR+ (needs a fork)
I build: Custom bars for buggy pilots
I write about kite stuff: at http://philipbchase.com
Philip Chase
|
|
|
pbc
Senior Member
Posts: 830
Registered: 9-5-2009
Location: Gainesville, FL
Member Is Offline
Mood: Updated, edited, and published
|
|
And are the foot of the XR+ compatible with the Flexifork?
I fly: Charger II 6.5m * Charger II 8m * Charger II 10m * Scorpion 10 (for sale) * Phantom II 12m * F-Arc 1200 * Venom 13m
I ride: Peter Lynn XR+ on Midis * Flexifoil Midi/Barrow * Peter Lynn Comp on Barrows * Peter Lynn XR+ (needs a fork)
I build: Custom bars for buggy pilots
I write about kite stuff: at http://philipbchase.com
Philip Chase |
|
|
acampbell
Posting Freak
Posts: 3879
Registered: 26-7-2006
Location: Las Cruces, NM. Sometimes
Member Is Offline
Mood: Digging Deserts and Mts.
|
|
"And are the foot of the XR+ compatible with the Flexifork?"
Huh? Foot?
The bolt-hole size and spacing for downtubes is the same for both bugs.
And yeah the wide wheel will fit the front of the Flexi. The hubs are identical. I have wides on my Flexi
|
|
|
pbc
Senior Member
Posts: 830
Registered: 9-5-2009
Location: Gainesville, FL
Member Is Offline
Mood: Updated, edited, and published
|
|
Oh sorry. I meant foot pegs. I need to hire an editor for my posts.
It's great to hear so many parts compatible. That gives me lots of options. 
Thanks,
Philip
I fly: Charger II 6.5m * Charger II 8m * Charger II 10m * Scorpion 10 (for sale) * Phantom II 12m * F-Arc 1200 * Venom 13m
I ride: Peter Lynn XR+ on Midis * Flexifoil Midi/Barrow * Peter Lynn Comp on Barrows * Peter Lynn XR+ (needs a fork)
I build: Custom bars for buggy pilots
I write about kite stuff: at http://philipbchase.com
Philip Chase
|
|
|
j0fer
Junior Member
Posts: 65
Registered: 17-4-2011
Member Is Offline
|
|
My apologies, I am SO sorry. For some reason PKF did not notify me that there were posts on this thread. I did get notification of new U2U's which I
will answer. I'm traveling this week and in all-day meetings (yay), so I may not respond immediately.
Thanks!
Joey
|
|
|
pbc
Senior Member
Posts: 830
Registered: 9-5-2009
Location: Gainesville, FL
Member Is Offline
Mood: Updated, edited, and published
|
|
Angus,
What's the interior diameter of the tubes the foot pegs of the Flexifoil fork slide into? I'm hoping to put XR+ foot pegs into a Flexifoil work.
Philip
I fly: Charger II 6.5m * Charger II 8m * Charger II 10m * Scorpion 10 (for sale) * Phantom II 12m * F-Arc 1200 * Venom 13m
I ride: Peter Lynn XR+ on Midis * Flexifoil Midi/Barrow * Peter Lynn Comp on Barrows * Peter Lynn XR+ (needs a fork)
I build: Custom bars for buggy pilots
I write about kite stuff: at http://philipbchase.com
Philip Chase
|
|
|
acampbell
Posting Freak
Posts: 3879
Registered: 26-7-2006
Location: Las Cruces, NM. Sometimes
Member Is Offline
Mood: Digging Deserts and Mts.
|
|
Phillip
On my current Flexi Scout, the foot pegs are welded in place, and suddenly I cannot remember that configuration on the earlier stainless bugs.
Looking at the WayBack Machine for archives of my own site, I cannot find that detail. Surprisingly the current Flexifoil site does not even show
buggies. I think the earlier ones were welded too. I'll have to search archives of all my back-up photos.
Sorry for the late reply. That e-mail address is jacked up on my iPhone and I check my desk every couple of days.
|
|
|
acampbell
Posting Freak
Posts: 3879
Registered: 26-7-2006
Location: Las Cruces, NM. Sometimes
Member Is Offline
Mood: Digging Deserts and Mts.
|
|
OK, so looking at archives, the earlier flexifoil foot pegs were indeed bolt-on, but I cannot divine the specs. Sorry
|
|
|
pbc
Senior Member
Posts: 830
Registered: 9-5-2009
Location: Gainesville, FL
Member Is Offline
Mood: Updated, edited, and published
|
|
| Quote: Originally posted by acampbell | | OK, so looking at archives, the earlier flexifoil foot pegs were indeed bolt-on, but I cannot divine the specs. Sorry |
I might just have to order the Flexifoil foot pegs with the fork and downtube. Better safe than sorry when shipping from the UK.
Or is there a source in the US?
I fly: Charger II 6.5m * Charger II 8m * Charger II 10m * Scorpion 10 (for sale) * Phantom II 12m * F-Arc 1200 * Venom 13m
I ride: Peter Lynn XR+ on Midis * Flexifoil Midi/Barrow * Peter Lynn Comp on Barrows * Peter Lynn XR+ (needs a fork)
I build: Custom bars for buggy pilots
I write about kite stuff: at http://philipbchase.com
Philip Chase
|
|
|
acampbell
Posting Freak
Posts: 3879
Registered: 26-7-2006
Location: Las Cruces, NM. Sometimes
Member Is Offline
Mood: Digging Deserts and Mts.
|
|
Check with Kent at A Wind of Change
|
|
|
pbc
Senior Member
Posts: 830
Registered: 9-5-2009
Location: Gainesville, FL
Member Is Offline
Mood: Updated, edited, and published
|
|
Thanks for all your help, Angus. I sent messages to Kent and the Extreme Kite Shop in the UK today. I need those parts!
Philip
I fly: Charger II 6.5m * Charger II 8m * Charger II 10m * Scorpion 10 (for sale) * Phantom II 12m * F-Arc 1200 * Venom 13m
I ride: Peter Lynn XR+ on Midis * Flexifoil Midi/Barrow * Peter Lynn Comp on Barrows * Peter Lynn XR+ (needs a fork)
I build: Custom bars for buggy pilots
I write about kite stuff: at http://philipbchase.com
Philip Chase
|
|
|
Windstruck
Posting Freak
Posts: 3341
Registered: 16-5-2015
Location: St George, UT, USA
Member Is Offline
Mood: Get in my buggy!
|
|
The other person who may have buggy parts is Mike:
https://bigmikeskites.com/
Not sure what he may or may not have on hand...
Born-Kites:
RaceStar+ (3.0m, 5.0m, 7.0m, 9.0m)
NasaStar-5 (2.5m, 4.0m)
NasaStar-4 (2.5m)
NasaStar-3 (3.2m)
Ozone kites:
Access (6.0m)
Flysurfer Kites:
Peak-5 (2.5m)
Buggy:
Peter Lynn BigFoot+ nose & tail; midsection VTT rail & seat kit; home-brewed AQR
NAPKA Member US2815
SWATK Member UT0003
|
|
|
![[*]](images/perspective/default_icon.gif){kind=icon}
