Power Kite Forum
Not logged in [Login - Register]
Go To Bottom

Printable Version  
Author: Subject: BigFoot 15mm axle adapters


Posts: 151
Registered: 12-1-2011
Location: South Padre Island
Member Is Offline

Mood: Retired from Work, Working overtime with the Wind

[*] posted on 7-6-2017 at 10:30 PM
BigFoot 15mm axle adapters

Looking for 15mm axle adapters for my Peter Lynn Bigfoot front tire.

Prism Micron
Rev B Series Standard,Vented,Full Vented
Rev PowerBlast 2-4
Rush 3 Pro
Ozone Access 4, 6, 8,10
Ozone Summit 8, 10
Ozone Frenzy 13m Ultralite
Cabrinha 7, 9, 13 Xbow
Cabrinha 11 Switchblade
2 PL BigFoot Buggies
View user's profile View All Posts By User


Posts: 2896
Registered: 5-16-2015
Location: Park City, UT, USA
Member Is Offline

Mood: Holding out for a 3.5m LS3!

[*] posted on 7-7-2017 at 02:09 PM

Burt - I don't know if they are in stock, but I believe this is what you may be looking for:


Good luck!

Born-Kite RaceStar (5.0m, 7.0m, 9.0m, 11.0m)
Born-Kite LongStar-3 (3.5m)
Born-Kite NasaStar-3 (1.5m, 3.2m)
Born-Kite NasaStar-4 (2.5m)

Hybrid - nose & tail PL BF+ with wide rear axle; midsection VTT rail & seat kit; two sets of Sysmic rims (BigFoots and 6-ply trailer tires); BigKid's AQR

NAPKA Member US2815
SWATK Member UT0003
View user's profile View All Posts By User

Posts: 1944
Registered: 3-14-2006
Location: Salt Lake City, Utah
Member Is Offline

Mood: Awesome - totally awesome

[*] posted on 7-7-2017 at 06:40 PM

We are out of stock on the 15mm ones, but are in the process of having a local machine shop make some more. PL no longer carries the 20mm to 15mm adapters so we have just made them in house. You can still get the 20mm to 12mm ones and we have those in stock.

The front tire shouldn't need 15mm adapters though, it should have a 12mm axle and therefore you should just be able to order in 12mm bearings. If you are using a 20mm wheel/bearing setup for your front wheel then you would need the 20mm to 12mm adapters. If you have 15mm bearings in your front wheel, you should be able to swap those bearings out for 12mm ones and be good to go without adapters. The 12mm and 15mm bearings are 32mm OD (or appx. 1.25 inches across). The 20mm bearings are 47mm OD (or 1 7/8" across).

Hope this helps.

View user's profile Visit user's homepage View All Posts By User

  Go To Top

Hosted by: Mad Moose Studio