prior to debur and stuff, its been 10 years of waiting for the right brakes but they are here now. Making the skates completely viable for all
terrain usage.
Looks like your image link is broken, but that first picture of the frame has me drooling. I was an inline speed skater from young childhood up until
I was about 20. I still have my old Bont Shark boots and some lightweight frames. How likely are you to be able to make another set of frames like
this for selling to me?
NAPKA US8008
Kites:
Ozone R1 V3 7m
Flysurfer Sonic v3 15m
Flysurfer Speed 3 Deluxe 19m
Peter Lynn Charger 2 12m
Ozone Access Reride 6m
Peter Lynn 2013 Reactor 5.5m
Peter Lynn 2013 Reactor 8.6m
Prism Tensor 5.0m
I love Bont frames you might like to see the comparison.
I have not made any skates for anyone in a while, mainly because of the time involved to make them, its possible please message me we can go from
there.
The Dalbellos in the picture I don't use those racing boots are overkill, I use a central entry boot for intermediate, easier to get in an out of very
comfortable. Much more comfortable than skate lace ups. This the better boot.
and you get them off ebay all day real cheap like $30
2016 Nobile Zen Hydrofoil with Infinity 5.1' splitboard
2019 Nobile 2HD with Ronix One boots
2020 Nobile NHP split foil with Ronix Parks boots
MG Supra ......... pulling KiteTrike
They don't need brakes for kiteskating or for using with the Rollercycle. But I have a third use for them. Going down ski slopes in the summer. We
have a 10 mile downhill fire road here / 3000 vertical feet often down through the clouds, terminating cutting through an orange vineyard for the last
1mile or so, have done that about 15 times, all downhill its the ultimate test for gravity based skating.
Kite skating remains the best application however for sure.
right on man. u definitely got the gear to drop in with for down hill.
weight per skate? u could run those with 2 wheels prolly be fine, right? look like my old rocces/MOGEMA frames. changed over my doomwheels to 8"
which gave, by far, better handling
i am not much of a skier, in frequency, so not much boot/binding knowledge for selection choices.
Were these frames commercial made pieces from some existing line and then altered/enhanced at home or completely designed from raw
bar stock all at home on own machine shop equip....?
![[*]](images/perspective/default_icon.gif){kind=icon}
10'x5"x.75" 