hi there, been out today on my flysurfer and my depower line came undone! i cant work out what holds it in ? can anyone help? the pic is the de power line and the trim. does it just tye on in a knot?

Quote:

Originally posted by shakenup hi there, been out today on my flysurfer and my depower line came undone! i cant work out what holds it in ? can anyone help? the pic is the de power line and the trim. does it just tye on in a knot?

A picture is worth several thousand words.....

can you see the picture?

no

There is no picture at all, no link, nothing. When I quote your posts (a good way to see broken links and stuff), there is nothing there.

Yes to answer your question.....make sure your depow line is approx 15 inches from the bar resting on the chicken loop to the bottom of the trimmer...........

1--you have a nylon loop in the bottom of your trimmer......thread your depow line thru the loop and tie a figure eight knot making sure you have 15 inches of line or throw in your depow line.....

2-- depow line length or throw.......make sure your bar is bottomed out on your chicken loop. Measure from the top side of your bar to the knot that your tied at your trimmer loop......this measurement should be 45 cm or 15 inches.....this will give you your correct throw/ depower.........

Anymore questions pleas contact me via U2U.....hope this helped

take a look at this link.......the last pic shows the bar resting against the chicken loop with the depow line running into to the bottom of the trimmer............again the distance from the top of the bar to the bottom of the trimmer should be 15 inches......

http://www.flysurfer.com/produkte/kites/infinity-bar/