Power Kite Forum

Excellent - Near Mint - GI Flight - SOLD

g00fba11 - 21-4-2012 at 08:46 PM

Maple Deck---- Blue Bionic Torsion Trucks ------GI Ratchet Bindings......Crossair Wheels......

Super Clean ---- Near Mint -------

Pics coming in the morning.........

$265 includes ConUS shipping..........

Cheddarhead - 21-4-2012 at 08:57 PM

Replacing it with a buggy?

B-Roc - 22-4-2012 at 06:37 AM

Couple questions:
Newer or original bionic trucks?
Royal blue or powder blue cubes?

I'm not interested but the flight 93 was my first board and I've gone through rachet bindings, velcro bindings, powder blue, royal blue, purple and yellow cubes on that so just wondering what the config is.

This is a fantastic board. Shorter deck but wide underfoot allows for super balance and stability.

g00fba11 - 22-4-2012 at 06:58 AM

yes...replacing it with a different vehicle.....

@B-Roc...the cubes look to be Black outer over white inner.....hope the pics answer the rest of the questions....

Here are the pics....as you can see the bottom graphic is near perfect......





indigo_wolf - 22-4-2012 at 09:03 AM

Not sure that is a Flight. Flight Lite 100s were ICC and Flight 93s were Bomberlite decks.

That looks like one of the "Garage Builds" where they took all the spiffiest 2010+ hardware and attached them to basic, but solid 9 ply maple decks.

So that would be the the last generation CrossAirs and Torsion bionics. The Talons look like they are one generation back from the last batch.

Great board at a bargain price, especially with the ConUS shipping.

ATB,
Sam

BeamerBob - 22-4-2012 at 09:13 AM

Our Flight 93's have those same bindings.

erich - 22-4-2012 at 11:06 AM

The deck is the flight -groundscape. Indigo is right, its an older deck with newer components. Its a nice board. I would guess it has yellow cubes. If it were the whites you probably would't be able to turn the thing.

g00fba11 - 22-4-2012 at 12:55 PM

Thanks for the once over Sam.....I am sure you are spot on.....I originally got it cause it looked cool.....loved the old skool maple deck......

To be honest I don't know if I am looking at the right thing when you guys are talking cubes....:lol: but my 120 pound son had no trouble turning on this board..... He has been riding his newer composite board.....he got one similar to flyjumps......and I won't be riding this one anymore.....so I thought I would pass on a great board to someone that will make good use of it......

indigo_wolf - 22-4-2012 at 02:39 PM

Quote:
Originally posted by g00fba11
To be honest I don't know if I am looking at the right thing when you guys are talking cubes....:lol: but my 120 pound son had no trouble turning on this board..... He has been riding his newer composite board.....he got one similar to flyjumps......and I won't be riding this one anymore.....so I thought I would pass on a great board to someone that will make good use of it......


On the olderer Bionics (cast metal hanger), it was easier to tell what the color of the cube was because color extended to most of the cube:


You can still do it on the newer ones, but the resin hanger cage is a bit more closed off and the cube itself had a black resin cover. The cube color is the color of the elastomer between the metal kingpin reinforcement and black resin cube cover.



In the third pic in your post, it looks like it is running Yellow cubes, which was what the standard cube was with boards if you didn't specify a durometer.

Hope that helps.

ATB,
Sam

g00fba11 - 22-4-2012 at 04:00 PM

Thanks Sam!!!! What would we do without you!!! Your the man!!!

After further review it def looks like Sam is correct...Black outside, Yellow inside.....

AnnieO - 22-4-2012 at 04:26 PM

U2U sent, I want it:D

g00fba11 - 22-4-2012 at 05:23 PM

SOLD.....

PHREERIDER - 23-4-2012 at 05:53 AM

nice cube run down sam!