macboy - 11-3-2010 at 09:47 PM
Anyone know where I can get my hands on some 20mm ID bearings to fit the old PL three spoke chrome hubs? I exhausted my local options today. If you
need the OD let me kow and I can measure it. Need four for the rears and then I think a 15mm ID for the front? (It's for the XR+)
WIllardTheGrey - 12-3-2010 at 02:00 AM
Like so? From AWOC
Width (mm):14
Outer Diameter (mm):47
Inner Diameter (mm):20
ripsessionkites - 12-3-2010 at 02:34 AM
on the XR+ its 20mm on the rear and 12mm on the front
if your buggy is older or the ST than its 15mm on the rear and 12mm on the front
i thought the 3 Spoke Rims were 15mm, i cant remember back to 2003
macboy - 12-3-2010 at 11:23 PM
Here's the scoop on the hubs. I'd need a bearing with an OD of 32mm and then an ID of 20mm for the rear axle bolt. Me thinks there's just not enough
differential between the OD and the ID to even make a bearing that would be worth taking a load.
Might be s#!t outta luck BUT I did find some hub type dealies that might work. Have to pursue it a bit further after NABX. Seems like these (or
something like these) might do the trick - AND open up a whole new world of wheel options:
Hubs
silvereaglekiter - 13-3-2010 at 04:20 AM
od -32 shaft -20 mcmaster-carr I love this place
macboy - 13-3-2010 at 10:03 AM
Well then! Thanks SilverEagle!
I don't think they ship to Canada but even just the thought that such an animal exists gives me hope I might find a Canadian supply. If not I have a
hunch that I might find a PKFer that'd help me out down south 
silvereaglekiter - 13-3-2010 at 10:09 AM
any time
I just ordered another set of bushings for some new wheels my self.
macboy - 13-3-2010 at 10:13 AM
Well, whaddaya know? I just placed an order and they'll ship to Canada. Why on earth did I think they wouldn't? Hopefully it's not UPS (not holding my
breath there) but you know what? At least I got 'em.....now the XR+ can roll into NABX with the bigfoots!
(Here's hopin' they make it up here in time ; )
silvereaglekiter - 13-3-2010 at 10:20 AM
sorry my order was shiped UPS Ground yours probably will to. ordered Friday
shipped out that afternoon Scheduled Delivery Date Monday
macboy - 13-3-2010 at 10:23 AM
Ah! Oh well. It won't hurt too bad considering I have a full set of bearings here that will be sitting waiting for the buggy build which will happen
at some undetermined date. With luck I'll be under the automatic $50 broker fee.
Damn UPS burns me. I'll let you know what they do to me ; )